Zhengzhou Sincola Machinery Co., Ltd
Create Greatest Value for Clients!
Add to Cart
Introductions
Wall cement mortar sprayer is suitable for pumping and spraying the dry ready-mixed mortar witch is pump, such as Cement mortars, Lime plasters, Gypsum plasters, Masonry mortars, Insulating plasters, Self-leveling floor screeds, fireproof paint,etc. Plaster Equipment is a continuously working mixing machine, designed for the application of any type pumpabIe dry ready-mixed mortar based on cement, gypsum and insulating mortar.
Application
1.The Plastering Machine is a new desinged multi-functional plastering equipment.
2.The Plastering Machine can be used for pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar.
3.The Plastering Machine can be used for plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material, water soluble etc.
Parameter:
| Model | KLW-120 Plaster Machine |
| Capacity | 100~120m2/h(mortar) 200~3002/h(putty) 3m3/h(grouting) |
| Rated working pressure | 4~6MPa |
| Motor power | 4.4kw |
| Main electricity motor | 3phase, 380v, 5.5kw |
| Horizontal delivery dist. | 30m |
| Max. aggregate size | 5mm |
| Vertical conveying dist. | 10~15m(mortar)/25~30m(putty) |
| Dimensions | 1300*650*900 (mm ) |
Features:
1. Small volume, light weight, convenient in indoor and outdoor mobile, construction;
2. Screw pump for pumping materials, guarantee the ejected material evenly, continuous;
3. Machine with high efficiency, low noise;
4. Module design, simple operation, easy maintenance.
5. The rotor/stator pump ensures the material is pumped and sprayed out continuously and evenly.
Working Principle:
The dry materials is supplied in sacks and filled into the large hopper.the low height of the N5 makes filling considerably easier.the materials is then transported by the agitator out of the hopper into the mixing pipe of the machine.the particular geometry of the agitator means the hopper can be emptied almost 100%.in the mixing area.the amount of water appropriate to the materials is supplied. depending on the mortar used.the amount of water can be separately regulated.the integrated water pump ensures the water pressure is always adequate.the mixing area is extremely large. this means the material is perfectly mixed and reaches the rotor/stator pump of the machine in an ideal condition. there it is then pumped at pressure through the mortar hose.the nozzle is connected in the end of mortar hose with compressed air.and then the mixed mortar is sprayed out evenly.the integrated mini compressor ensure the air pressure and consumption always adequate. as well as remote-control by air valve.attention for detail instruction .please follow the operation manual.
Pictures:
