Zhengzhou Sincola Machinery Co., Ltd
Create Greatest Value for Clients!
Add to Cart
High quality wall cement plastering ready mix mortar spraying for wall
Introductions
Mortar spraying machine products are mainly used for building interior and exterior walls, cement mortar spraying and external wall insulation materials mortar spraying, refractory spraying.
The mortar spraying machine produced by our company basically has no floor ash, save water and save materials, can greatly reduce the cost, and is easy to operate. It does not need to be scaffolding, no mobile equipment, no need to repair the raft, and the yin and yang angles and the top plate can be sprayed freely. Fast, efficient and labor intensive, a sprayer can easily spray 120 cubic meters per hour.
Application
1. The Plastering Machine is a new desinged multi-functional plastering equipment.
2. The Plastering Machine can be used for pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar.
3. Suitable for spraying materials: putty powder, coating, emulsion paint, real stone paint, cement mortar, dry mortar, thermal insulation mortar, waterproof material, fireproof material, heat insulation material, sound absorption material and other water-soluble materials.
Parameter:
| Model | KLW-150 Plaster Machine |
| Capacity | 100~120m2/h(mortar) 200~3002/h(putty) 3m3/h(grouting) |
| Rated working pressure | 4~6MPa |
| Motor power | 4.4kw |
| Main electricity motor | 3phase, 380v, 5.5kw |
| Horizontal delivery dist. | 30m |
| Max. aggregate size | 5mm |
| Vertical conveying dist. | 10~15m(mortar)/25~30m(putty) |
| Dimensions | 1300*650*900 (mm ) |
Features:
1. Small volume, light weight, convenient in indoor and outdoor mobile, construction;
2. Screw pump for pumping materials, guarantee the ejected material evenly, continuous;
3. Machine with high efficiency, low noise;
4. Module design, simple operation, easy maintenance.
5. The rotor/stator pump ensures the material is pumped and sprayed out continuously and evenly.
Advantage of plastering equipment for wall:
The traditional spraying machine uses compressed air to atomize the coating. The spraying speed of the coating is generally 10 m / s. Such a fast spraying speed leads to overspray and severe rebound of the coating, and brings back a large amount of paint molecules to cause the coating. The four are scattered, which not only wastes a lot of paint, but also causes serious pollution to the air, and the surface of the coating is prone to paralysis.Compared with traditional machines, the mortar spraying machine has the following advantages
First, extremely high coating efficiency. The spraying efficiency is up to 500-1200 square meters per hour, which is more than 10 times that of traditional construction.
Second, excellent surface quality. The spray coating is smooth, brilliance, dense, brushless, scalding, and granules.
Third, extend the service life of the coating. High-pressure airless spraying enables the coating particles to penetrate into the wall space, so that the paint film also forms a mechanical bond on the wall surface, enhancing the adhesion of the paint and prolonging the service life.
Fourth, it is easy to overcome the corners, gaps and uneven brushing parts.
Fifth, save paint. The thickness of the brush is extremely uneven, generally between 30 and 250 microns.
Pictures:
